How To Make Helical Threads In Solidworks

Solidworks - Comments Off - Posted on January, 21 at 9:52 pm

A lot of us have seen a plastic bottle created in SolidWorks. It’s a common demo that resellers use. One feature on a plastic bottle is the helical thread on the neck of the bottle. To some, it looks like a very complicated feature. There are various opinions on the best way to create a […]

Read More..>>

Posted in Solidworks | Comments Off

Installation and configuration of Solidworks 2007 or Solidworks 2008 on Windows 7 x64 bit

Solidworks - Comments Off - Posted on September, 6 at 10:26 am

Officially Solidworks 2007 & 2008 is not supported but we can install and use both versions in Windows 7 (32 & 64 bit). Here we will see that how can we install & configure Solidworks 2007 in Windows 7 x64 bit. First of all install Solidworks 2007 or 2008 like same as in Windows XP. […]

Read More..>>

Posted in Solidworks | Comments Off

Create the intersection between a loft and a sweep.

Solidworks - No Comments » - Posted on September, 18 at 8:47 pm

This tutorial will create the intersection between a loft and a sweep. We are going to worke on a hairdryer, and need to create the profiles to generate the lofted solid before start. 1. The first step is to just extrude the handle up to the next surface. You could also modify by adding another profile to […]

Read More..>>

Posted in Solidworks | No Comments »

SolidWorks 2009 Custom Properties

Solidworks - No Comments » - Posted on March, 25 at 2:00 pm

Read More..>>

Posted in Solidworks | No Comments »

SolidWorks Hotkeys

Solidworks - No Comments » - Posted on March, 16 at 7:54 pm

Back View CTRL+2   Rebuild CTRL+B Bottom View CTRL+6   Redraw CTRL+R Copy CTRL+C   Right View CTRL+4 Cut CTRL+X   Save CTRL+S Delete Delete   Select Edges E Forced Rebuild CTRL+Q   Select Faces X Front View CTRL+1   Select Vertices V Help Shift+F1   Toggle Select Filters F5 (Toolbar) ISO View CTRL+7   […]

Read More..>>

Posted in Solidworks | No Comments »

Solidworks V8 Engine

Solidworks - No Comments » - Posted on March, 16 at 7:50 pm

Read More..>>

Posted in Solidworks | No Comments »

Why SolidWorks?

Solidworks - No Comments » - Posted on February, 22 at 4:29 pm

When you think about SolidWorks, what comes to mind? For most people, it’s our 3D mechanical CAD (MCAD) software. And while that may be what we’re known best for, that’s not all there is to SolidWorks. At SolidWorks we’re dedicated to providing engineers, designers and other creative professionals with the tools they need to design […]

Read More..>>

Posted in Solidworks | No Comments »